Thickness: 25mm, 32mm, 40mm, 50mm,75mm, 100m
Widths: 50mm, 75mm, 100mm, 125mm, 150mm, 200mm, 250mm, 300mm
Lengths: 1.8 meters to 6.0 meter

SPECIFICATIONS
• 100% Clear-wood recovery
• No knots or defects
• Birdseye & pin-knots that are less than 5mm in diameter are allowed,maximum 3 per board
• Light resin streaking and heartwood allowed
• No blue-stain or resin pockets are allowed

SPECIFICATIONS
• Minimum clear wood recovery of 650mm and longer with 80% clear-wood recovery
• Free from decay except dead bark and encased knots
• Free from decay except dead bark and encased knots
• No blue- stain
• Resin pockets are treated as a defect
• Needle trace, heartwood and pitch in growth rings allowable unless over 30mm wide
• No pitch allowed
• Allowed individual birds eye, groups of 2 or more in a 100mm area are not allowed
• No more than 3 pin knots less than 5mm are allowed in clear cut area

SPECIFICATIONS
• Minimum clear-wood recovery of 450mm and longer with 60% clear-wood recovery
• Free from decay except dead bark and encased knots
• Needle trace, heartwood and pitch in growth rings allowable unless over 30mm wide
• Allowed individual birds eye-group of 2 or more in 100mm area are not allowed
• Not more than 3 pins knots are less than 5mm are allowed in clear cut area
• No blue stain. No Pitch allowed. Resin Pockets are treated as a defect.

SPECIFICATIONS

• Minimum clear-wood recovery of 450mm longer with 50% clear-wood recovery from heart
• Hit and miss pith allowed up to 20% of board
• Blue-stain allowed
• Board must firmly hold together
• This timber is cut from the center part of the log
• Needle trace, heartwood and pitch in growth rings allowable unless 30mm wide
• Allowed individual birds eye-groups of 2 or more in a 100mm area are not allowed
• No more than 3 pin knots less than 5mm are allowed in clear cut area
• Sold as Grade#3 and up